FlarmSpeaker

Hears Everything

Flarm Speaker is an audio warning device for Flarm traffic messages. When alert message from Flarm is decoded, device will make audible sound. Generated sound depends on message severity (Alarm type).Flarm Speaker also features phono output with 3.5mm mono jack located in the top center at the back. Speaker can be turned off only when phono jack is plugged in and slide switch is at AUTO position. There are three volume adjustments available with push button on the back of the device.

Phono Output.

 

Phono output with 3.5mm mono jack located in the top center at the back. Phono output is always enabled.

Volume Adjustments.

 

There are three volume adjustments available with push button on the back of the device. Communication statuses are also visible with three LEDs on the back.

Specifications

Hardware

1 RJ11 FLARM connector

1 RS-232 communication

1 Phono output with 3.5mm mono jack

3 LEDs on the back

1 Switch (SPK.ON, AUTO)

Input and output

Input voltage 9-36 VDC

Baudrate: 19200 (fixed)

Make It Yours.

Order It From Your Local Dealer.

LXNAV – The Pilot’s Choice

Menu